Solution of applying beauty glue
1. First， use a utility knife to cut the rubber nozzle according to the size of the gap. Pay attention to the inclination when cutting， so as to facilitate the discharge. View details ›Scope of use of beauty gel
1. Various decoration joints and internal cornersUse of beauty glue
1. Make up for decoration defects and deficienciesCalculation of nail free glue consumption
The adhesive strip with a width of 6mm can be applied for about 10m；Instructions for use of nail free adhesive
Clean the construction surface to ensure there is no oil or dust.Main uses of nail free adhesive
1. Furniture manufacturing industry: bonding mercury lens， aluminum edge sealing， handle， crystal plate， marble， plate bonding， etc；Nail free construction steps
To ensure product quality， customers are advised to clean the surface without dust and grease before use； No ponding and damp； At the same time， it is necessary to ensure that one side is absorbent material and solid to ensure the bonding effect. View details ›Usage of Styrofoam
① Take the foaming gun and clean it with polyurethane cleaner to ensure smooth flow；Precautions for use of styrofoam
Foam adhesive is a moisture curing foam， which should be sprayed on the wet surface when used. The higher the humidity， the faster the curing. Uncured foam can be cleaned with cleaning agent， and cured foam shall be removed by mechanical method （sanding or cutting）. The solidified foam will turn yellow after being exposed to ultraviolet light. It is recommended to paint the solidified foam surface with other materials （cement mortar， paint， etc.）. After using the spray gun， please clean it with special detergent immediately View details ›Precautions for storage of styrofoam
The normal operating temperature of the foam tank is＋5~＋40 ℃， . the operating temperature is＋18~＋25 ℃. Under low temperature， it is recommended to keep the product at a constant temperature of＋25~＋30 ℃ for 30 minutes before use to ensure its . performance. The temperature resistance range of cured foam is - 35 ℃~＋80 ℃. View details ›Main uses of styrofoam
Installation of doors and windows: sealing， fixing and bonding between doors and windows and walls.Operating Steps of Glass Glue
It is beautiful to hit down a line without stopping. The force should be even. It should be hit in place at one time， and it should be beautiful. View details ›
Scan WeChat chat
