It is beautiful to hit down a line without stopping. The force should be even. It should be hit in place at one time, and it should be beautiful.
First, you should know how to use glue gun;
Second point: determine the width of your glue, that is, the gap width;
Third point: cut the rubber nozzle into a slightly smaller caliber than the gap according to the width of the gap where you apply glue;
Fourth, protect the two sides of the sealant gap. Paste 2-3CM adhesive tape on the glass, profile, stone, etc. on both sides of the gap, which can protect the glass, profile, stone, etc. on both sides, and also has great convenience for correcting the glue in the gap;
Fifth, master the speed of glue application and glue gun movement, and move the glue gun evenly according to the depth of the gap;
Sixth point: repair the gluing area, find a blade to scrape the uneven place, and fill the glue where there is no gap when gluing;
Point 7: After 48 hours, the construction can be completed by removing the adhesive tape on both sides of the material.
