The normal operating temperature of the foam tank is+5~+40 ℃, * the operating temperature is+18~+25 ℃. Under low temperature, it is recommended to keep the product at a constant temperature of+25~+30 ℃ for 30 minutes before use to ensure its * performance. The temperature resistance range of cured foam is - 35 ℃~+80 ℃.
Precautions
A. Foam adhesive is a moisture curing foam, which should be sprayed on the wet surface when used. The higher the humidity, the faster the curing. Uncured foam can be cleaned with cleaning agent, and cured foam shall be removed by mechanical method (sanding or cutting). The solidified foam will turn yellow after being exposed to ultraviolet light. It is recommended to paint the solidified foam surface with other materials (cement mortar, paint, etc.). After using the spray gun, please clean it with special detergent immediately
B. When replacing the charging tank, shake the new tank well (at least 20 times), remove the empty tank, and quickly replace the new charging tank to prevent the nozzle connection from curing.
C. The flow control valve and trigger of the spray gun can control the flow of foam. Close the flow valve clockwise when the injection stops.
