Clean the construction surface to ensure there is no oil or dust.
Cut the nozzle, install the nozzle and extrude it with a sealing gun.
Bonding method of load bearing materials:
It can directly bond the load bearing materials. First, bond the load bearing materials together, then separate them, wait for drying for about 5 minutes, and then firmly press and knock the materials to be bonded again to make them in place. Braces can be used to support if necessary. (Heavy materials must be supported)
Dry splicing method: (ceiling line, skirting line, door frame, background wall)
1. Extrude "Z" shaped adhesive along the bonding surface.
2. Squeeze the adhesive side to the surface to be bonded, and press the two sides tightly.
3. Pull the two bonding surfaces apart and let the liquid nail super glue volatilize for 2-5 minutes.
After 4.2-5 minutes, press again and tap gently along the joint.
5. Temporarily fix the adhesive with auxiliary tools for 24 hours, and then cancel the auxiliary fixation.
The bonding effect shall be achieved within 6.24 hours, and it shall be completely cured within 2-3 days.
Wet joint bonding method: (wood floor, marble table top and other large materials)
1. Apply liquid nail super glue according to the dry bonding method.
2. Press the bonding surface tightly to achieve * bonding effect within 24 hours and fully cure within 2-3 days.
Fast adhesive liquid nail has super fast adhesion, especially on the Duoye surface. As long as any surface is hollow, it can achieve fast adhesion without any auxiliary devices.